Yaskawa
P1000 Drive
Giá: Liên hệ
Gọi 0904 828 747 hoặc email hungpv@haphongjsc.com để nhận báo giá và thời gian giao hàng nhanh nhất.
Gọi 0904 828 747 hoặc email hungpv@haphongjsc.com để nhận báo giá và thời gian giao hàng nhanh nhất.
Thông tin chi tiết P1000 Drive
P1000 Drive
P1000 Drive 3/4 – 1000 HP
The P1000 drive provides simple, reliable, cost-effective control for variable-torque loads through 1000 HP. Specific application features, energy savings, and network connectivity make the P1000 a great choice for industrial fans and pumps.
P1000 Drive Features
LCD Operator with Real Time Clock
- 5-line, 16-character alpha-numeric display with time and date stamping for events, along with timer controls for starting, stopping, and speed changes without the need for external controls.
Application Macros
- Choose from pre-configured fan and pump setup macros to match the application for quick and easy set up.
Selectable and Custom Engineering Units
- Allows for easy configuration of keypad display to match process and feedback devices such as PSI, GPM, Feet.
Underload Detection
- Monitors load and will shut system down in the event of a fan belt or pump shaft breakdown.
Parameter Storage and Removable Terminal Board
- Allows for easy replacement of control card without removing control wires, and stores all drive settings without the need for a copy device.
PI Process Control
- Maintains a set point for closed loop control of fans and pumps for pressure, flow, or temperature regulation, and eliminates the need for a closed loop output signal from a process controller. Independent PI to control an external device in the system.
Power Quality
- Built-in DC reactors (30 HP and larger) provide input harmonics benefit, and protection from input disturbances. Integrated 12 Pulse version (480V, 40 HP and larger) provides a cost-effective solution for low harmonics.
Dynamic Noise Control
- Monitors the load at all times and reduces the output voltage automatically, reducing motor audible noise.
Networking Options
- Industrial Communication
- Modbus RTU (built-in)
- DeviceNet
- EtherNet/IP
- Modbus TCP/IP
- PROFIBUS-DP
- PROFINET
- Building Automation Networks (BAS)
- BACnet
- Lonworks
- Metasys (N2)
- Apogee (P1
P1000 Drive Specifications
| Item | Specification |
|---|---|
| Continuous Load Capacity | Variable Torque (square of percent speed) |
| Intermittent Load Capacity | 120% for 60 seconds |
| Output Frequency | 0.01 to 400 Hz |
| Enclosure Solutions | Open Type/IP00 NEMA Type 1(kit required for some models) IFlange Type (front = Open/IP00, back = NEMA Type 12) |
| Power Solutions | 6-pulse (standard) 240V: 3/4 to 175 HP 480V: 1 to 1000 HP 600V: 1 to 250 HP12-pulse (low harmonic) 480V: 40 to 1000 HP |
| Ambient Operating Temperature | -10°C to 40°C (14°F to 104°F) |
| Global Certification | UL, CSA, CE, RoHS, C-Tick |
| Standard I/O | (8) multi-function digital inputs (24Vdc) (3) multi-function analog inputs (0-10 VDC, 4-20 mA) (1) multi-function pulse input (1) fault relay output (form C) (1) multi-function relay (form C) (2) multi-function relay outputs (form A) (2) multi-function analog outputs (0 +/- 10 VDC, 4-20mA) Sensor feedback power supply (+24VVdc at 150mA supply) 120V converter for 8 standard digital inputs (option) |
P1000 Drive Models & Ratings
P1000 Drive 200-240V, 3-Phase, Standard
| Drive Model Number | Rated Output Current (Amps) | Nominal HP 3 | Standard Enclosure 1, 2 |
|---|---|---|---|
| CIMR-PU2A0004FAA | 3.5 | 3/4 | NEMA 1 |
| CIMR-PU2A0006FAA | 6 | 1 | |
| CIMR-PU2A0008FAA | 8 | 2 | |
| CIMR-PU2A0010FAA | 9.6 | 2 | NEMA 1 |
| CIMR-PU2A0012FAA | 12 | 3 | |
| CIMR-PU2A0018FAA | 17.5 | 5 | |
| CIMR-PU2A0021FAA | 21 | 7.5 | NEMA 1 |
| CIMR-PU2A0030FAA | 30 | 10 | |
| CIMR-PU2A0040FAA | 40 | 15 | |
| CIMR-PU2A0056FAA | 56 | 20 | NEMA 1 |
| CIMR-PU2A0069FAA | 69 | 25 | |
| CIMR-PU2A0081FAA | 81 | 30 | |
| CIMR-PU2A0110FAA | 110 | 40 | NEMA 1 |
| CIMR-PU2A0138FAA | 138 | 50 | |
| CIMR-PU2A0169FAA | 169 | 60 | NEMA 1 |
| CIMR-PU2A0211FAA | 211 | 75 | |
| CIMR-PU2A0250AAA | 250 | 100 | Protected Chassis |
| CIMR-PU2A0312AAA | 312 | 125 | |
| CIMR-PU2A0360AAA | 360 | 150 | Protected Chassis |
| CIMR-PU2A0415AAA | 415 | 175 |
- Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU2A081FAA and smaller).
- Only models ending in FAA (CIMR-PU2A0211FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
- Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.
P1000 Drive 200-240V, 1-Phase, Standard
| Drive Model Number 1, 2 |
Single Phase Input – Sizing Method AA (Continuous Full Power) |
Single Phase Input – Sizing Method BB (86% max power of connected motor size) |
||||
|---|---|---|---|---|---|---|
| Without Additional Reactor | With Additional Reactor | Motor Amps | Motor Size (HP) | |||
| Motor Amps | Motor Size (HP) | Motor Amps | Motor Size (HP) | |||
| CIMR-PU2A0004FAA | 1.7 | 1/3 | 2.4 | 1/2 | 3.5 | 1/2 |
| CIMR-PU2A0006FAA | 3.5 | 3/4 | 3.5 | 3/4 | 4.6 | 1 |
| CIMR-PU2A0008FAA | 4.6 | 1 | 4.6 | 1 | 6.6 | 1 |
| CIMR-PU2A0010FAA | 4.6 | 1 | 4.6 | 1 | 6.6 | 1.5 |
| CIMR-PU2A0012FAA | 6.6 | 1.5 | 7.5 | 2 | 7.5 | 2 |
| CIMR-PU2A0018FAA | 7.5 | 2 | 10.6 | 3 | 10.6 | 3 |
| CIMR-PU2A0021FAA | 7.5 | 2 | 10.6 | 3 | 10.6 | 3 |
| CIMR-PU2A0030FAA | 10.6 | 3 | 10.6 | 3 | 17 | 5 |
| CIMR-PU2A0040FAA | 10.6 | 3 | 17 | 5 | 17 | 5 |
| CIMR-PU2A0056FAA | 17 | 5 | 24 | 7.5 | 24 | 7.5 |
| CIMR-PU2A0069FAA | 24 | 7.5 | 31 | 10 | 31 | 10 |
| CIMR-PU2A0081FAA | 31 | 10 | 46 | 15 | 46 | 15 |
| CIMR-PU2A0110FAA | 31 | 10 | 31 | 10 | 46 | 15 |
| CIMR-PU2A0138FAA | 46 | 15 | 46 | 15 | 59 | 20 |
| CIMR-PU2A0169FAA | 59 | 20 | 59 | 20 | 75 | 25 |
| CIMR-PU2A0211FAA | 75 | 25 | 75 | 25 | 88 | 30 |
| CIMR-PU2A0250AAA | 88 | 30 | 88 | 30 | 114 | 40 |
| CIMR-PU2A0312AAA | 114 | 40 | 114 | 40 | 143 | 50 |
| CIMR-PU2A0360AAA | 143 | 50 | 143 | 50 | 169 | 60 |
| CIMR-PU2A0415AAA | 169 | 60 | 169 | 60 | 211 | 75 |
- Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU2A0081FAA and smaller). Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
- Only models ending in FAA (CIMR-PU2A0211FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
- For Flange Drives, use the Sizing Method above to determine proper drive size. Use selected model number with “UAA” suffix instead of “FAA” or “AAA” suffix.
(A) Use single-phase input sizing method A for applications requiring more than 86% motor power. When sizing with additional reactor, refer to “Reactors for Single Phase Input” under P1000 Power Options on this site. Caution: Adding more impedance than specified will degrade performance.
(B) Use single-phase input sizing method B for applications requiring a maximum of 86% motor power.
P1000 Drive 200-240V, 3-Phase, Flange
| Drive Model Number 1 | Rated Output Current (Amps) | Nominal HP 2 | Enclosure 1 |
|---|---|---|---|
| CIMR-PU2A0004UAA | 3.5 | 3/4 | Flange |
| CIMR-PU2A0006UAA | 6 | 1 | |
| CIMR-PU2A0008UAA | 8 | 2 | |
| CIMR-PU2A0010UAA | 9.6 | 3 | Flange |
| CIMR-PU2A0012UAA | 12 | 3 | |
| CIMR-PU2A0018UAA | 17.5 | 5 | |
| CIMR-PU2A0021UAA | 21 | 7.5 | Flange |
| CIMR-PU2A0030UAA | 30 | 10 | |
| CIMR-PU2A0040UAA | 40 | 15 | |
| CIMR-PU2A0056UAA | 56 | 20 | Flange |
| CIMR-PU2A0069UAA | 69 | 25 | |
| CIMR-PU2A0081UAA | 81 | 30 | |
| CIMR-PU2A0110UAA | 110 | 40 | Flange |
| CIMR-PU2A0138UAA | 138 | 50 | |
| CIMR-PU2A0169UAA | 169 | 60 | |
| CIMR-PU2A0211UAA | 211 | 75 | Flange |
| CIMR-PU2A0250UAA | 250 | 100 | |
| CIMR-PU2A0312UAA | 312 | 125 | |
| CIMR-PU2A0360UAA | 360 | 150 | Flange |
| CIMR-PU2A0415UAA | 415 | 175 |
- Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
- Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.
P1000 Drive 380-480V, 3-Phase, Standard
| Drive Model Number | Rated Output Current (Amps) | Nominal HP 3 | Standard Enclosure 1, 2 |
|---|---|---|---|
| CIMR-PU4A0002FAA | 2.1 | 1 | NEMA 1 |
| CIMR-PU4A0004FAA | 4.1 | 2 | |
| CIMR-PU4A0005FAA | 5.4 | 3 | |
| CIMR-PU4A0007FAA | 6.9 | 4 | NEMA 1 |
| CIMR-PU4A0009FAA | 8.8 | 5 | |
| CIMR-PU4A0011FAA | 11.1 | 7.5 | |
| CIMR-PU4A0018FAA | 17.5 | 10 | NEMA 1 |
| CIMR-PU4A0023FAA | 23 | 15 | |
| CIMR-PU4A0031FAA | 31 | 20 | |
| CIMR-PU4A0038FAA | 38 | 25 | NEMA 1 |
| CIMR-PU4A0044FAA | 44 | 30 | |
| CIMR-PU4A0058FAA | 58 | 40 | |
| CIMR-PU4A0072FAA | 72 | 50 | NEMA 1 |
| CIMR-PU4A0088FAA | 88 | 60 | |
| CIMR-PU4A0103FAA | 103 | 75 | |
| CIMR-PU4A0139FAA | 139 | 100 | NEMA 1 |
| CIMR-PU4A0165FAA | 165 | 125 | |
| CIMR-PU4A0208AAA | 208 | 150 | Protected Chassis |
| CIMR-PU4A0250AAA | 250 | 200 | |
| CIMR-PU4A0296AAA | 296 | 250 | |
| CIMR-PU4A0362AAA | 362 | 300 | Protected Chassis |
| CIMR-PU4A0414AAA | 414 | 350 | |
| CIMR-PU4A0515AAA | 515 | 400 | Protected Chassis |
| CIMR-PU4A0675AAA | 675 | 500 | |
| CIMR-PU4A0930AAA | 930 | 700-800 | Protected Chassis |
| CIMR-PU4A1200AAA | 1200 | 900-1000 |
- Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU4A044FAA and smaller).
- Only models ending in FAA (CIMR-PU4A0165FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
- Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.
- Models CIMR-PU4A0930AAA and CIMR-PU4A1200AAA must be used with semiconductor input fuses and must be fed by a power source that has ground fault protection. A supplementary ground fault protection device can be added between the drive and the power source to address this requirement.
P1000 Drive 380-480V, 1-Phase, Standard
| Drive Model Number 1, 2 |
Single Phase Input – Sizing Method AA (Continuous Full Power) |
Single Phase Input – Sizing Method BB (86% max power of connected motor size) |
||||
|---|---|---|---|---|---|---|
| Without Additional Reactor | With Additional Reactor | Motor Amps | Motor Size (HP) | |||
| Motor Amps | Motor Size (HP) | Motor Amps | Motor Size (HP) | |||
| CIMR-PU4A0002FAA | 0.8 | 1/3 | 1.1 | 1/2 | 1.6 | 3/4 |
| CIMR-PU4A0004FAA | 1.6 | 3/4 | 2.1 | 1 | 2.1 | 1 |
| CIMR-PU4A0005FAA | 2.1 | 1 | 3 | 1.5 | 3.4 | 2 |
| CIMR-PU4A0007FAA | 3.0 | 1.5 | 3.4 | 2 | 3.4 | 2 |
| CIMR-PU4A0009FAA | 3.4 | 2 | 4.8 | 3 | 4.8 | 3 |
| CIMR-PU4A0011FAA | 3.4 | 2 | 4.8 | 3 | 4.8 | 3 |
| CIMR-PU4A0018FAA | 4.8 | 3 | 4.8 | 3 | 7.6 | 5 |
| CIMR-PU4A0023FAA | 4.8 | 3 | 7.6 | 5 | 7.6 | 5 |
| CIMR-PU4A0031FAA | 11 | 7.5 | 11 | 7.5 | 14 | 10 |
| CIMR-PU4A0038FAA | 11 | 7.5 | 14 | 10 | 14 | 10 |
| CIMR-PU4A0044FAA | 14 | 10 | 14 | 10 | 21 | 15 |
| CIMR-PU4A0058FAA | 21 | 15 | 21 | 15 | 27 | 20 |
| CIMR-PU4A0072FAA | 27 | 20 | 27 | 20 | 34 | 25 |
| CIMR-PU4A0088FAA | 27 | 20 | 27 | 20 | 34 | 25 |
| CIMR-PU4A0103FAA | 27 | 20 | 27 | 20 | 34 | 25 |
| CIMR-PU4A0139FAA | 52 | 40 | 52 | 40 | 65 | 50 |
| CIMR-PU4A0165FAA | 52 | 40 | 52 | 40 | 65 | 50 |
| CIMR-PU4A0208AAA | 65 | 50 | 65 | 50 | 77 | 60 |
| CIMR-PU4A0250AAA | 77 | 60 | 77 | 60 | 96 | 75 |
| CIMR-PU4A0296AAA | 96 | 75 | 96 | 75 | 124 | 100 |
| CIMR-PU4A0362AAA | 124 | 100 | 124 | 100 | 156 | 125 |
| CIMR-PU4A0414AAA | 156 | 125 | 156 | 125 | 180 | 150 |
| CIMR-PU4A0515AAA | 156 | 125 | 156 | 125 | 180 | 150 |
| CIMR-PU4A0675AAA | 180 | 150 | 180 | 150 | 240 | 200 |
- Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU4A0044FAA and smaller). Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
- Only models ending in FAA (CIMR-PU4A0165FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
- For Flange Drives, use the Sizing Method above to determine proper drive size. Use selected model number with “UAA” suffix instead of “FAA” or “AAA” suffix.
(A) Use single-phase input sizing method A for applications requiring more than 86% motor power. When sizing with additional reactor, refer to “Reactors for Single Phase Input” under P1000 Power Options on this site. Caution: Adding more impedance than specified will degrade performance.
(B) Use single-phase input sizing method B for applications requiring a maximum of 86% motor power.
P1000 Drive 380-480V, 3-Phase, Flange
| Drive Model Number1 |
Rated Output Current (Amps) |
Nominal HP2 | Enclosure1 |
|---|---|---|---|
| CIMR-PU4A0002UAA | 2.1 | 1 | Flange |
| CIMR-PU4A0004UAA | 4.1 | 2 | |
| CIMR-PU4A0005UAA | 5.4 | 3 | |
| CIMR-PU4A0007UAA | 6.9 | 4 | Flange |
| CIMR-PU4A0009UAA | 8.8 | 5 | |
| CIMR-PU4A0011UAA | 11.1 | 7.5 | |
| CIMR-PU4A0018UAA | 17.5 | 10 | Flange |
| CIMR-PU4A0023UAA | 23 | 15 | |
| CIMR-PU4A0031UAA | 31 | 20 | |
| CIMR-PU4A0038UAA | 38 | 25 | Flange |
| CIMR-PU4A0044UAA | 44 | 30 | |
| CIMR-PU4A0058UAA | 58 | 40 | |
| CIMR-PU4A0072UAA | 72 | 50 | Flange |
| CIMR-PU4A0088UAA | 88 | 60 | |
| CIMR-PU4A0103UAA | 103 | 75 | |
| CIMR-PU4A0139UAA | 139 | 100 | Flange |
| CIMR-PU4A0165UAA | 165 | 125 | |
| CIMR-PU4A0208UAA | 208 | 150 | Flange |
| CIMR-PU4A0250UAA | 250 | 200 | |
| CIMR-PU4A0296UAA | 296 | 250 | |
| CIMR-PU4A0362UAA | 362 | 300 | Flange |
| CIMR-PU4A0414UAA | 414 | 350 | |
| CIMR-PU4A0515UAA | 515 | 400 | Flange |
| CIMR-PU4A0675UAA | 675 | 500 | |
| CIMR-PU4A0930UAA3 | 930 | 700-800 | Flange |
| CIMR-PU4A1200UAA3 | 1200 | 900-1000 |
- Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
- Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.
- Models CIMR-PU4A0930UAA and CIMR-PU4A1200UAA must be used with semiconductor input fuses and must be fed by a power source that has ground fault protection. A supplementary ground fault protection device can be added between the drive and the power source to address this requirement.
P1000 Drive 380-480V, 3-Phase, 12-Pulse Flange
| Drive Model Number 12-Pulse1 | Rated Output Current (Amps) | Nominal HP2 | Enclosure1 |
|---|---|---|---|
| CIMR-PU4T0058UAA | 58 | 40 | Flange |
| CIMR-PU4T0072UAA | 72 | 50 | |
| CIMR-PU4T0088UAA | 88 | 60 | Flange |
| CIMR-PU4T0103UAA | 103 | 75 | |
| CIMR-PU4T0139UAA | 139 | 100 | Flange |
| CIMR-PU4T0165UAA | 165 | 125 | |
| CIMR-PU4T0208UAA | 208 | 150 | Flange |
| CIMR-PU4T0250UAA | 250 | 200 | |
| CIMR-PU4T0296UAA | 296 | 250 | |
| CIMR-PU4T0362UAA | 362 | 300 | Flange |
| CIMR-PU4T0414UAA | 414 | 350 | |
| CIMR-PU4T0515UAA | 515 | 400 | Flange |
| CIMR-PU4T0675UAA | 675 | 500 | |
| See note 3 | 930 | 700-800 | Flange |
| See note 3 | 1200 | 900-1000 |
- Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external. Flange parts can be removed if convential mounting is desired.
- Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors.
- Models CIMR-PU4A0930xxx and CIMR-PU4A1200xxx are user configurable for either 6-Pulse (3-Phase) or 12-Pulse (6-Phase) input. See Standard 480V for model numbers.
P1000 Drive 500-600V, 3-Phase, Standard
- Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU5A032FAA and smaller).
- Only models ending in FAA (CIMR-PU5A0099FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
- Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.
P1000 Drive 500-600V, 1-Phase, Standard
| Drive Model Number 1, 2 |
Single Phase Input – Sizing Method AA (Continuous Full Power) |
Single Phase Input – Sizing Method BB (86% max power of connected motor size) |
||||
|---|---|---|---|---|---|---|
| Without Additional Reactor | With Additional Reactor | Motor Amps | Motor Size (HP) | |||
| Motor Amps | Motor Size (HP) | Motor Amps | Motor Size (HP) | |||
| CIMR-PU5A0003FAA | 1.7 | 1 | 2.4 | 1.5 | 1.7 | 1 |
| CIMR-PU5A0004FAA | 2.4 | 1.5 | 2.7 | 2 | 2.7 | 2 |
| CIMR-PU5A0006FAA | 2.7 | 2 | 3.9 | 3 | 3.9 | 3 |
| CIMR-PU5A0009FAA | 3.9 | 3 | 6.1 | 5 | 6.1 | 5 |
| CIMR-PU5A0011FAA | 2.7 | 2 | 3.9 | 3 | 3.9 | 3 |
| CIMR-PU5A0017FAA | 6.1 | 5 | 6.1 | 5 | 9 | 7.5 |
| CIMR-PU5A0022FAA | 6.1 | 5 | 9 | 7.5 | 9 | 7.5 |
| CIMR-PU5A0027FAA | 9 | 7.5 | 11 | 10 | 11 | 10 |
| CIMR-PU5A0032FAA | 9 | 7.5 | 11 | 10 | 11 | 10 |
| CIMR-PU5A0041FAA | 17 | 15 | 17 | 15 | 22 | 20 |
| CIMR-PU5A0052FAA | 17 | 15 | 17 | 15 | 22 | 20 |
| CIMR-PU5A0062FAA | 27 | 25 | 27 | 25 | 32 | 30 |
| CIMR-PU5A0077FAA | 32 | 30 | 32 | 30 | 41 | 40 |
| CIMR-PU5A0099FAA | 32 | 30 | 32 | 30 | 41 | 40 |
| CIMR-PU5A0125AAA | 52 | 50 | 52 | 50 | 62 | 60 |
| CIMR-PU5A0145AAA | 52 | 50 | 52 | 50 | 62 | 60 |
| CIMR-PU5A0192AAA | 77 | 75 | 77 | 75 | 99 | 100 |
| CIMR-PU5A0242AAA | 77 | 75 | 77 | 75 | 99 | 100 |
- Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU5A0032FAA and smaller). Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
- Only models ending in FAA (CIMR-PU5A0099FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
- For Flange Drives, use the Sizing Method above to determine proper drive size. Use selected model number with “UAA” suffix instead of “FAA” or “AAA” suffix.(A) Use single-phase input sizing method A for applications requiring more than 86% motor power. When sizing with additional reactor, refer to “Reactors for Single Phase Input” under P1000 Power Options on this site. Caution: Adding more impedance than specified will degrade performance.
(B) Use single-phase input sizing method B for applications requiring a maximum of 86% motor power.
P1000 Drive 500-600V, 3-Phase, Flange
| Drive Model Number1 | Rated Output Current (Amps) | Nominal HP2 | Enclosure1 |
|---|---|---|---|
| CIMR-PU5A0003UAA | 2.7 | 1 & 2 | Flange |
| CIMR-PU5A0004UAA | 3.9 | 3 | |
| CIMR-PU5A0006UAA | 6.1 | 5 | |
| CIMR-PU5A0009UAA | 9 | 7.5 | Flange |
| CIMR-PU5A0011UAA | 11 | 10 | |
| CIMR-PU5A0017UAA | 17.5 | 15 | |
| CIMR-PU5A0022UAA | 22 | 20 | Flange |
| CIMR-PU5A0027UAA | 27 | 25 | |
| CIMR-PU5A0032UAA | 32 | 30 | |
| CIMR-PU5A0041UAA | 41 | 40 | Flange |
| CIMR-PU5A0052UAA | 52 | 50 | |
| CIMR-PU5A0062UAA | 62 | 60 | |
| CIMR-PU5A0077UAA | 77 | 75 | Flange |
| CIMR-PU5A0099UAA | 99 | 100 | |
| CIMR-PU5A0125UAA | 125 | 125 | Flange |
| CIMR-PU5A0145UAA | 145 | 150 | |
| CIMR-PU5A0192UAA | 192 | 200 | Flange |
| CIMR-PU5A0242UAA | 242 | 250 |
- Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external. Flange parts can be removed if conventional mounting is desired.
- Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors.
- Models CIMR-PU4A0930xxx and CIMR-PU4A1200xxx are user configurable for either 6-Pulse (3-Phase) or 12-Pulse (6-Phase) input. See Standard 480V price page on page 4 for model numbers and prices.
Biến tần yaskawa P1000 Drive
Sản phẩm liên quan
